新闻动态

首页 > 新闻动态
影响井盖模具的因素
发布人:管理员   发布时间:2022-5-21
为了能够让井盖有着更好的效果,在生产井盖模具的时候会在水泥的里面加入一些沙子,泥土之类的材料,然后统一倒在搅拌机的里面加入清水开始搅拌。

In order to make the well cover have a better effect, when producing the well cover mold, some materials such as sand and soil will be added into the cement, and then uniformly poured into the mixer and added with clean water to start mixing.

之后将搅拌好的水泥浇筑在井盖模具的里面开始制作生产,因为模具的型号比较的小,所以他的制作非常的短。

Then pour the mixed cement into the well cover mold and start production. Because the model of the mold is relatively small, his production is very short.

水泥的好坏会直接影响到生产出来的预制块,如果水泥式劣质的,存在大量的杂质,制作出来的条石硬度不够的话就不能够正常使用,也会给井盖模具造成磨损。

The quality of cement will directly affect the prefabricated blocks produced. If the cement is of poor quality, there are a lot of impurities, and the hardness of the manufactured strip stone is not enough, it will not be able to be used normally, and it will also cause wear and tear to the well cover mold.

                               

因为井盖模具是模具的一种,所以如果出现破损是不能够修补的,只能够更换新的模具进行加工生产,然后将旧模具送回处理厂。

Because the well cover mold is a kind of mold, if it is damaged, it cannot be repaired. Only a new mold can be replaced for processing and production, and then the old mold can be sent back to the treatment plant.

井盖模具的用途是面对当前在公路两侧使用的小型混凝土井盖儿命名的,使用井盖模具能够让井盖预制块的速度更快一些,加快了工程的进展。

The purpose of the well cover mold is named after the small concrete well covers currently used on both sides of the highway. The use of the well cover mold can make the prefabricated block of the well cover faster and speed up the progress of the project.

 

上一篇:没有了