新闻动态

首页 > 新闻动态
井盖模具质量成本相互协调
发布人:管理员   发布时间:2022-3-15
井盖模具设计是模具的根本,设计导致整体产品出现不良品和企业生产效率结构设计问题,冲模结构不合理,细长凸模没有设计加固装置,出料口不畅现堆集,卸料力过大使凸模承受交变载荷加剧等。

The well cover mold design is the foundation of the mold. The design leads to the defective products of the overall product and the structural design problems of the enterprise's production efficiency. The die structure is unreasonable, the slender punch has no design reinforcement device, the discharge port is not smooth and piled up, and the excessive unloading force makes the punch bear the alternating load, etc.

在有温升的条件下,应尽量减小因温升所造成的软化现象由此可见,为了限度地改善盖板模具粘着磨损,应选用抗回火软化能力强的基材并辅之以表面硬化处理

Under the condition of temperature rise, the softening phenomenon caused by temperature rise should be minimized. It can be seen that in order to improve the adhesive wear of cover plate die to the greatest extent, the base material with strong tempering softening resistance should be selected and supplemented with surface hardening treatment

使之与摩擦密切相关的表层部分获得必要的硬度、自润滑性和耐磨性最为有效。

It is most effective to obtain the necessary hardness, self lubrication and wear resistance of the surface part closely related to friction.

                             

井盖模具耐磨好,强韧耐用,具有良好的强韧性能承受较大的冲击负荷,在生产过程中可当时脱离,能够不间断的连续生产,高于其他模具生产量的几十倍产品外观整洁

The well cover mold has good wear resistance, toughness and durability, has good strength and toughness performance, bears large impact load, can be separated at that time in the production process, can produce continuously without interruption, which is dozens of times higher than the production capacity of other molds, and the product appearance is neat

尺寸标准,表面图案、文字,根据要求,随时更换。因模具抗震性好,使其生产的产品抗压性增强,破坏荷载提高。

Size standard, surface pattern and text, which can be changed at any time according to requirements. Due to the good seismic resistance of the die, the compression resistance of the products produced by the die is enhanced and the failure load is increased.

 

上一篇:没有了